SPCC Cold-Rolled Steel
SPCC is a cold-rolled low-carbon sheet steel with good flatness, thickness control and formability. It is suitable for bending, stamping, drawing and flanging, particularly where dimensional consistency and cosmetic quality matter. Bare-steel corrosion resistance is limited, but it is a useful substrate for powder coating, painting and plating.
Typical Applications
Electronic and instrument housings, cabinet skins, control panels, appliance parts, indoor enclosures and decorative panels. Suitable for cosmetic or functional parts with controlled assembly gaps, surface quality and hole locations.
Reference Properties & Manufacturing Parameters
Reference values are indicative and are not guaranteed specifications. Material grade, stock condition, processing, test method and part geometry can change the result. A listed temperature is not a continuous-use rating.
| Dimensional tolerance | ±0.2 mm |
|---|---|
| Minimum wall thickness | 0.8 mm |
| Reference temperature range | ≤300 °C |
| Reference tensile strength | 270–410 MPa |
| Reference density | 7.85 g/cm³ |
- Reference values vary with grade, material condition, part geometry and manufacturing process. Confirm final specifications during drawing review.
- Temperature figures are source reference values; the test method, loading and exposure duration are not specified and must be confirmed for the application.
Finishing Options
Confirm compatibility with the exact material grade and application. Define cosmetic surfaces, coating thickness, masking and any dimensional or performance requirements before manufacture.
Design & Manufacturing Review
- Specify sheet grade, thickness, finish and rolling direction where relevant. Confirm the selected stock before finalizing bend geometry.
- Review bend radii, bend reliefs, hole-to-bend distances and fastener access. Flat patterns must account for the actual forming process.
- Define weld locations, cosmetic surfaces and any coating or masking requirements.
For a quotation, email CAD files, drawings, material requirements, quantity and target delivery date to [email protected].