5052 Aluminum Sheet
5052 is an aluminum-magnesium sheet alloy with good corrosion resistance, bendability and low weight. It is well suited to lightweight structures and cosmetic parts. Compared with some high-strength aluminum alloys, it is better suited to complex bending and drawing operations. Anodizing, powder coating or painting can provide additional appearance and environmental protection.
Typical Applications
Electronics and telecommunications housings, panels, lightweight cabinets, drone and robot skins, automotive trim and brackets, and corrosion-resistant sheet metal structures. Suitable where bendability, low weight and cosmetic quality are important.
Reference Properties & Manufacturing Parameters
Reference values are indicative and are not guaranteed specifications. Material grade, stock condition, processing, test method and part geometry can change the result. A listed temperature is not a continuous-use rating.
| Dimensional tolerance | ±0.2 mm |
|---|---|
| Minimum wall thickness | 0.8 mm |
| Reference temperature range | ≤150 °C |
| Reference tensile strength | 190–260 MPa |
| Reference density | 2.68 g/cm³ |
- Reference values vary with grade, material condition, part geometry and manufacturing process. Confirm final specifications during drawing review.
- Temperature figures are source reference values; the test method, loading and exposure duration are not specified and must be confirmed for the application.
Finishing Options
Confirm compatibility with the exact material grade and application. Define cosmetic surfaces, coating thickness, masking and any dimensional or performance requirements before manufacture.
Design & Manufacturing Review
- Specify sheet grade, thickness, finish and rolling direction where relevant. Confirm the selected stock before finalizing bend geometry.
- Review bend radii, bend reliefs, hole-to-bend distances and fastener access. Flat patterns must account for the actual forming process.
- Define weld locations, cosmetic surfaces and any coating or masking requirements.
For a quotation, email CAD files, drawings, material requirements, quantity and target delivery date to [email protected].